Articles

• Troubleshooting Call Failed: 46 Errors

  Overview FaxMaker will call any fax that fails from phase B through phase E a call failed: 46 error, depending on the fax device. An analog or Brooktrout device will receive a handshaking error, rathe...

• A Timeout Occurred:30 and Handshaking failures for MultiTech 9234 series modems

  Overview This article provides instructions for resolving issues with outgoing faxes failing with a handshaking error 54 or a timeout occurred: 30 when using the MultiTech modem 9234 series models.  I...

• Handshaking Errors and Calls Not Answered When Using Multitech Devices

  Overview The purpose of this article is to provide a solution when users experience handshaking errors and calls not being answered when using Multitech devices.     Environment Any FaxMaker installat...

• Error: 'No dial tone detected: 45' when trying to send a via an analog fax modem

  Answer PROBLEMWhen sending a fax the error 'No dial tone detected: 45' will be displayed in the GFI FaxMaker monitor. The COM log may show the following information: ...,634,1,#00004a08,#000094ec,info...

• Error: 'Call Failed 46' when receiving faxes ( ECM )

  Answer PROBLEM Unable to send fax. Fax fails with error 'Call failed: 46' that is shown in GFI FaxMaker monitor and / or debug logs.   ENVIRONMENT GFI FaxMaker supported Bintec Media gateway All suppo...

• Error response 42 when sending faxes with GFI FaxMaker

  Overview When sending a multipage fax document with GFI FaxMaker using a Mainpine IQ Express fax board, the error response 42 may be encountered.     Environment Any FaxMaker installation using an ana...

• Error 'Called Failed 46' when sending fax ( XCAPI )

  Answer PROBLEMUnable to send fax. Fax fails with error 'Call failed: 46' that is shown in GFI FaxMaker monitor and / or debug logs.   ENVIRONMENT GFI FaxMaker TE-Systems XCAPI All supported environmen...

• Error 'Called Failed 46' when sending fax ( CLIP )

  Answer PROBLEMUnable to send fax. Fax fails with error 'Call failed: 46' that is shown in GFI FaxMaker monitor and / or debug logs.   ENVIRONMENT GFI FaxMaker All supported environments   SOLUTION Thi...

• All Incoming Fax Calls Fail with a CAPI Error 0x349A

  Overview All inbound fax calls are shown as ringing in FaxMaker monitor. However, when FaxMaker accepts the inbound fax call, it fails immediately with a called failed 46 error. The LANCOM/Bintec rout...

• Faxes Failing When Using a Mainpine Fax Board

  Overview This article provides information about steps to take when experiencing fax failures using a Mainpine board.       Environment Any FaxMaker installation using a Mainpine fax board.     Soluti...