Environment GFI FaxMaker 2014 and older Process Follow the steps mentioned below to change from Active Directory mode to SMTP mode (and vice versa): Press Ctrl + R. Enter regedit.exe and click...
Overview This article provides information about the fax priority for an Outbound Fax. Information The fax priority can be specified in the email body using a TextAPI command. The TextAPI commands are...
Overview This article provides information about the specific fax line which a user can send faxes on. Information It is possible to specify a specific fax line for a user who sends faxes by using Tex...
Overview This article provides information on the procedures to perform a telnet test, in order to verify proper Relay for GFI FaxMaker. Process Prerequisites Telnet testing requires that the telnet c...
Overview This article provides information about modifying the Fax report email notifications for GFI FaxMaker. Information The GFI FaxMaker report email notification can be modified via the c...
Overview This article provides information about formatting the fax number of the fax recipient when using the GFI FaxMaker Online Web Service. Information GFI FaxMaker Online Web Service requires the...
Overview This article provides the steps to determine if the attached fax modem supports voice mode. Process Open a HyperTerminal session on the machine. Type the command AT#CLS=? and press enter. ...
Answer As part of their normal operations, some GFI Software products require specific TCP and / or UDP ports to be open, so that a connection can be made from the server to the client and vice versa....
Overview By default, GFI FaxMaker uses the SMTP port (TCP Port 25) to receive email fax requests and to upload fax transmission reports. In certain scenarios, Microsoft Windows firewall can be configu...
AnswerGFI FaxMaker does not require an exact match between the called party number and the MSN list entries in order to accept an incoming call. The range of MSNs allocated to an ISDN installation is ...
